Filter
Top Products
OPERATION
Command Line Control
350-9047 v3.0.1 DGy Model 201x User’s Guide 60
. . . . .
S Example: To test the terminal operation, type ver at the
terminal command prompt and press ENTER. The
terminal should respond with a message similar to that
shown in
Figure 3-23.
• Enable command log
When the Enable command log box is checked all commands
entered from the terminal or issued from the DGy Control Panel
are displayed. When unchecked, only terminal commands and
system responses are displayed.
• Clearing the Terminal window
~ To clear the contents of the Terminal window click on
the
Clear button at the bottom of the Terminal window.
. . . . . . . . .
COMMAND LOG
The Terminal window can be used to log commands that are sent from
the DGy Control Panel to the DGy 201x. This is particularly useful for
debugging or in the development of a script for an external controller
using the command line interface. See
Chapter 6 for details about each
command.
Figure 3-24 Terminal Window Configured for Logging
Important Only use the command log as a guide to controlling
the DGy 201x from the command set. The DGy Web
Control Panel application supports functions not
available in the command set. Use the log as a
starting point and be ready to simplify the result.