Filter
Top Products
INSTALLATION AND SET UP
Front Panel
350-9047 v3.0.1 DGy Model 201x User’s Guide 13
. . . . .
• The DGy 201x is provided with a rear rack bracket and arm to
support the rear of the chassis. It is recommended that the
bracket be used to provide additional stability.
• Attach the rear brackets to the rack adapter at the rear of the
chassis.
• Slide an arm through the slot on the rack adapter and attach the
arm to the chassis.
• Attach the arm to the rear bracket by means of the fasteners
located in the arms.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FRONT PANEL
The figure shows the front panel of the DGy 201x.
Figure 2-1 DGy 201x Front Panel
Descriptions of each control and indicator are provided below:
• Power Switch
Use the AC Power Switch to turn the DGy 201x on and off.
When the unit is on, the switch is illuminated.
Important Do not use the DGy 201x as a shelf to support other
pieces of equipment as this may cause damage to the
rack ears and mounting screws.
FUNCTION NETWORK FIXED HDD REMOVABLE HDD
record activity activity activity
play link full full
RG
BSPECTRUM
digital
image
recorder
DGy
Power Switch
Function Indicators
Fixed Disk Indicators
Removable Disk Indicators
Removable Disk Drive
Disk Power Indicator
Drive Activity Indicator
Drive Bay Key Lock
Network Indicators
Note When the power is turned off from the front panel, the
DGy 201x first closes any open files on the disk
before completing power-down. This brief delay,10 to
15 seconds, is normal and the power indicator will
stay lit during this interval. Do not turn off the DGy
201x by disconnecting the power cord or
terminating the power source, as this may result in
corruption of data on the disk.