Filter
Top Products
OPERATION
Playing Clips
350-9047 v3.0.1 DGy Model 201x User’s Guide 64
. . . . .
7. As required, click the Pause button to pause recording, or the
Stop
button to stop recording. Once stopped, the recording can
be played back. Refer to the
Playing Clips section on page 64
for details.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PLAYING CLIPS
Before proceeding with this setup, refer to Before Starting on page 24
for important setup and connection information.
To play back a clip from an optional remote disk drive connect to the disk
using the procedure described in the
Mounting a Remote Disk Option
section on page 61.
CHOOSING A PLAYBACK DRIVE
Playing back a recording can be done from the removable drive, optional
fixed drive, or from a remote drive using the optional NFS mount.
1. If the Clip Browser is not open, open it from the DGy Control
Panel by clicking
Clip Path. See Clip Browser Window on page
35.
2. Use the left pane of the browser (Figure 3-6) to navigate to the
drive and folder that contains the desired clip.
The removable drive is named /remov and the remote drive
(NFS) is named /remot. Do not to confuse the names.
PLAYBACK A CLIP
Use the following steps to play back a clip with DGy 201x.
1. If a clip was just recorded on the DGy Control Panel, simply
click the
Play button to play back the same clip.
2. To play back a different clip, click the Clip Name label to display
the Clip Browser
window.
3. In the Clip Browser, highlight the desired clip and click Select.
The clip is transferred to the Clip Name field in the DGy Control
Panel. Click the
Play button.
OR
Double click the desired clip name in the Clip Browser window
to immediately begin play.
Note The Player/Recorder must be stopped before a clip
selection can be made.