Filter
Top Products
COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 103
. . . . .
PLAYLOOP <ON | OFF> This command modifies the behavior of PLAY. If
PLAYLOOP is OFF then PLAY plays its clip (or
list of clips) once, then stops. If
PLAYLOOP is ON,
PLAY plays the listed clip(s) in a loop until STOP is
issued.
Default: OFF
SYNChronizedSTATus (none) Lists information about any queued synchronized
command. See
SYNChronizedPLAY and
SYNChronizedRECord.
PLAYSPeeD [-100.0 ... 100.0 ] This command sets the DGy 201x play speed.
PLAYSPeeD = 1.0 represents normal speed in the
forward direction.
Positive PLAYSPeeD values represent playback in
the forward direction.
To play in fast forward use a positive value of
PLAYSPeeD greater than 1.0.
To play in slow motion, use a positive value
between 1.0 and 0.0.
Negative PLAYSPeeD values represent playback in
reverse.
To play in fast reverse use a negative value greater
than -1.0
To play in slow reverse use a negative value
between -1.0. and 0.0.
Example: Set the play speed for 8 times normal in
the reverse direction.
PLAYSPD -8.0
Example: Set the play speed for 1/10 normal
speed in the forward direction.
PLAYSPD 0.1
Default: 1.0
PAUSE (none) In Play mode, this command pauses playback.
Playback resumes when the
Play command is
sent.
In Record mode, this command pauses record.
Record resumes when the
Record command is
sent.
NextCLIP (none) Cues the DGy from the currently playing clip to the
beginning of the next recorded clip. Works in Play
or Pause modes.
PrevCLIP (none) Moves the DGy from the currently playing clip to the
beginning of the previously recorded clip, then cues.
Works in Play or Pause modes.
Table 6-6 DGy 201x Play and Record Commands (Continued)
Command Arguments Description