Filter
Top Products
COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 96
. . . . .
. . . . . . . . .
IMAGE COMMANDS
The table below lists all DGy 201x image commands, their arguments
and detailed descriptions.
Table 6-3 Image Commands
Command Arguments Description
BRIghtness <-500..500> Sets brightness value of the selected input. Only
valid for
INputSouRCe of RGB.
Note: This command is not active in the Play
mode. The brightness or contrast cannot be
adjusted during playback.
Default: 0
CONTrast <0..200> Sets contrast value of the selected input. Only valid
for
INputSouRCe of RGB.
Note This command is not active in the Play
mode. The brightness or contrast cannot be
adjusted during playback.
Default: 100