Filter
Top Products
COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 92
. . . . .
RestoreFactoryDefaults
Miscellaneous Restores all user settings to their factory default values.
SeekToMARK
Record/Play Sends the recorder to the specified event mark and cues there.
SHUTDOWN
Miscellaneous Remotely shuts down the DGy 201x.
STOP
Record/Play This command cancels Play, Pause, and Record functions.
StreamFragmentSTATus
Stream Reports the multicast streaming state of the system.
STREAMIN
Stream Initiat
es the incoming multicast stream for decoding and viewing.
STREAMINADDR
Stream Sets or displays the incoming multicast stream IP address.
STREAMINPORT
Stream Sets or displays the incoming multicast stream port.
STREAMINSTOP
Stream Stops the incoming multicast stream.
STREAMOUT
Stream Initiates the outgoing multicast stream transmission.
STREAMOUTADDR
Stream Sets or displays the outgoing multicast stream IP address.
STREAMOUTPORT
Stream Sets or displays the outgoing multicast stream transmission
port.
STREAMOUTSTOP
Stream Stops the outgoing multicast stream transmission.
SYNChronizedPLAY
Record/Play Sets up the DGy to start playback of a specified clip at a pre-
determined time.
SYNChronizedRECord
Record/Play Sets up the DGy to start recording at a pre-determined time.
SYNChronizedSTATus
Record/Play Reports the status of any queued synchronized commands.
SYNChronizedSTOP
Record/Play Cancels all pending queued synchronized commands.
SYStemReSet
Miscellaneous Restarts the DGy firmware.
TestPattern
Miscellaneous Enables or disables the internal test patterns.
TimeCodeQuery
Record/Play Returns the timecode at the current clip position.
TimeZone
Time Sets the time zone relative to UTC.
TiMingDELete
Input Deletes the specified timing entry from the Timing List.
TiMingLIST
Input Displays the list of saved input and output timings.
TiMingLISTCLEAR
Input Deletes all user entries from the Timing List.
TiMingLISTLOAD
Input Create and save a custom timing list entry into the user space.
UMOUNT
Clip/Disk Unmounts a remote drive from the DGy file system.
UNPROTECTCLIP
Clip/Disk Change the status of a protected clip to unprotected.
UpdateFirmWare
Miscellaneous Updates the firmware for the DGy.
VERsion
Miscellaneous Displays the version numbers of the installed firmware
components.
VOLumeINFO
Clip/Disk Displays disk storage parameters.
VOLumeNAME
Clip/Disk Used to read or write the DGy disk volume name.
Table 6-1 Alphabetical Command Summary (Continued)
Command Category Description