Filter
Top Products
COMMAND LINE INTERFACE
Commands
350-9047 v3.0.1 DGy Model 201x User’s Guide 98
. . . . .
OUTPUT
. . . . . . . . .
COMMANDS
The table below lists all DGy 201x output commands, their arguments
and detailed descriptions.
Table 6-5 Output Commands
Command Arguments Description
GAMma <0.5...2.0> Sets the playback gamma.
Default: 1.0
OUTPUT (none) A query command which returns information on the
current output timing.
OutPutTiMingLOAD <1..160> Sets the output raster to the timing selected from
the Timing List. In order to load the output timing
parameters the DGy 201x must be in the FreeRun
mode.
(see OutputMode)
Refer to Factory Timing List, page 118 for details.
OutPutTiMingNAME <name> Assigns a name to the current output timing. The
argument can be up to 23 alphanumeric characters
with no spaces (underscore is acceptable).
OutPutTiMingSAVE <100..160> Saves the timing data of the current output raster
into the Timing List. The argument specifies which
Timing List position is used.
If OutPutTiMingSAVE is issued for an already
occupied position, the DGy requests overwrite
confirmation.
Refer to the Factory Timing List section for
additional details.
OutPutTiMing <hfp> <hs> <hbp>
<hact> <vfp> <vs>
<vbp> <vact> <hfreq>
<sync> <hpol> <vpol>
<il>
Sets the timing for the current output.
OutPutTiMing
(Alternate)
<HFP | HS | HBP |
HACT | VFP | VS | VBP
|VACT| HFREQ| SYNC |
HPOL | VPOL |
IL>[<value>]
Changes (or reports) one parameter of the current
output timing.