Filter
Top Products
FIRMWARE UPGRADE
Manual Update Procedure
350-9047 v3.0.1 DGy Model 201x User’s Guide 145
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MANUAL UPDATE PROCEDURE
Download new firmware files FWDGY.x.y.x.tgz and FPGADGY.x.y.z.tgz
from the RGB Spectrum web site to a PC. These files must be uploaded
and installed in the correct sequence. Carefully follow the steps below.
. . . . . . . . .
FTP FIRMWARE FILE
1. Begin a Telnet session. See IP Address Setup via Ethernet for
instructions on opening a command window.
2. Change to the directory on the PC that contains the new
firmware.
3. Type dir to verify that the firmware files are present.
4. Type ftp followed by the IP address of the DGy 201x.
S Example: Assuming that the DGy 201x IP address is currently
set to 192.168.1.150
Type: ftp 192.168.1.150 and press ENTER.
Figure C-8 FTP Firmware
5. Enter the user name rgb. The user name and password are
case sensitive; enter in lower case only.
6. Enter the password spectrum.