Filter
Top Products
4-6 AUDIO Menu
4-64 Chapter 4 Menu Settings
Chapter 4 Menu Settings
4-6-2 Digital Audio Output
Signal Source Track Selection
(DIGOUT EXCHNG)
To make the source track selection for the digital audio
output signal on each of channels 1 to 12, use the
following procedure.
1 Press the [F3] (DIGOUT CH3 TR3) button.
The DIG OUT menu appears, together with a
source track selection window for the digital audio
output signals.
2 Carry out the source track selection for the digital
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3 Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (DIGOUT CH1 TR1) to
[F8] (DIGOUT CH8 TR8) buttons in the AUDIO
INPUT screen, and in the ALT+DIG OUT screen
obtained by pressing the ALT button, the
[F1](DIGOUT CH9) to [F4] (DIGOUT CH12) buttons,
you can select the source track for each channel.
Making input signal selections for individual
channels with the numeric buttons
1 Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2 Press the cursor R or r button, to select the source
track to be output.
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.
You can also make this setting using VTR SETUP
menu item 834 “DIGITAL AUDIO OUTPUT
EXCHANGE”.
4-6-3 Analog Audio Output
Signal Source Track Selection
(ANAOUT EXCHNG)
To make the source track selection for the analog
audio output signal on each of channels 1 to 4, use the
following procedure.
1 Press the [F4] (ANAOUT CH4 TR4) button.
The ANA OUT menu appears, together with a
source track selection window for the analog audio
output signals.
2 Carry out the source track selection for the analog
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3 Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (ANAOUT CH1 TR1) to
[F4] (ANAOUT CH4 TR4) buttons, you can select the
source track for each channel.
DIGOUT
CH1
TR1
DIGOUT
CH2
TR2
DIGOUT
CH3
TR3
DIGOUT
CH4
TR4
DIGOUT
CH5
TR5
DIGOUT
CH7
TR7
DIGOUT
CH8
TR8
EXITDIGOUT
CH6
TR6
AUDIO OUTPUT EXCHANGE
CH1
TR1
CH2
TR2
CH3
TR3
CH4
TR4
CH5
TR5
CH6
TR6
CH7
TR7
CH8
TR8
CH9
TR9
CH10
TR10
CH11
TR11
CH12
TR12
ANAOUT
CH1
TR1
ANAOUT
CH2
TR2
ANAOUT
CH3
TR3
ANAOUT
CH4
TR4
EXIT
ANALOG AUDIO OUTPUT EXCHANGE
CH1
TR1
CH2
TR2
CH3
TR3
CH4
TR4