Filter
Top Products
6-2 Advanced Automatic Editing
6-14 Chapter 6 Editing
Chapter 6 Editing
6 Turn the search dial to set the initial speed.
The selected speed is displayed in the time data
display.
7 Press the PREVIEW/REVIEW and PREROLL
buttons at the same time.
The tape prerolls and the player VTR begins
playing at the initial speed.
8 When the x indicator appears with a beep
indicating that the IN point has been passed, rotate
the search dial to the desired playback speed(s).
The varying playback speeds are stored in memory
while the x indicator appears in the display.
9 Press the STOP button.
If the x indicator goes off before you press
the STOP button
The VTR has reached its storage capacity, and cannot
store any more playback speed variations.
To exit DMC editing mode
Press the ALT/[F7] (DMC) buttons in HOME menu.
Performing DMC editing
After setting the playback speeds in preview mode,
press the RECORDER button and REC/EDIT button.
DMC editing is performed at the playback speed(s)
stored in memory.
To confirm the results of DMC editing
Press the PREVIEW/REVIEW button.
6-2-2 Animation Editing
Animation editing is a form of insert editing which
makes it easier to record a succession of still frames in
fixed field or frame units. The procedure for editing
after selecting animation editing is exactly the same as
for normal insert editing.
To select animation editing, use the VTR SETUP
menu item 301 “EDIT OPERATION MODE”.
normal: Selects normal insert editing.
CG: Selects editing in frame units, principally for
recording computer graphics (CG).
When the edit completes, the OUT point
automatically becomes the next IN point, and the
next OUT point is set automatically with 1 frame
added.
Follow the procedure below to perform animation
editing.
1 Set the IN point.
The OUT point is set automatically.
PREVIEW/REVIEW button
14
2
3
97 6,8