Filter
Top Products
2-1 Control Panel
2-2 Chapter 2 Locations and Functions of Parts
Chapter 2 Locations and Functions of Parts
2-1-1 Upper Control Panel
1 POWER switch
Pressing on the ‘(’ side of this switch powers the unit
and lights up the information display (page 2-8) and
color display (page 2-5). To turn the unit off, press on
the ‘a’ side of the switch.
2 ERROR indicator
This lights when a serious problem occurs, such as an
operational malfunction or system internal error.
You can check the details on the lower control panel.
For details, see “Error Messages and Warning Messages”
on page A-5.
3 WARNING indicator
This flashes when there is a fault in the unit. You can
check the details on the lower control panel.
For details, see “Error Messages and Warning Messages”
on page A-5.
4 EJECT button
Pressing this button automatically ejects the cassette
after several seconds.
5 Format indicators (Digital BETACAM/
HDCAM/HDCAM SR)
These show the format of the cassette loaded into the
unit.
6 REMOTE buttons
Press one of the following buttons, to select how the
VTR is controlled.
ETHERNET: This button lights when pressed,
enabling access from the network connected to the
ETHERNET connector on this unit.
1(9P): This button lights when pressed, enabling this
unit to be controlled from a device connected to
the REMOTE 1-IN (9P) connector or REMOTE
1-I/O (9P) connector.
2(50P): This button lights when pressed, enabling
this unit to be controlled from a device connected
to the REMOTE 2 PARALLEL I/O (50P)
connector.
Note
When the VTR is being controlled by the external
equipment connected to the REMOTE1-IN (9P) or
REMOTE 2 PARALLEL I/O (50P) connector, all tape
transport buttons and edit operation buttons are
disabled, except the STOP and EJECT buttons. You
may also specify the disabling or enabling of all
buttons by setting the VTR SETUP menu item 008
“LOCAL FUNCTION ENABLE”.
SRW-5000
HD DIGITAL VIDEO CASSETTE RECORDER
EJECT
POWER
REMOTE
CHANNEL
CONDITION
PHONES
ERROR WARNING
ETHERNET
1(9P) 2(50P)
1 POWER switch
2 ERROR indicator
3 WARNING indicator
4 EJECT button
5 Format indicators
7 CHANNEL CONDITION indicators
6 REMOTE buttons
9 PHONES jack
8 PHONES level control
Cassette compartment