Filter
Top Products
Appendix A-9
Appendix
Button Display Function Setting
[F1] PAGE TOP Move to the top page
[F2] PAGE END Move to the page containing the last message
[F3] FULL MSG Display in full the message selected with the cursor
[F4] ALL CLEAR Clear messages (LOG DATA)
[F5] WARNING Display warning messages on, off
[F6] ERROR Display error messages on, off
[F7] CONDITION Display condition messages on, off
[F9] TIME Toggle between time code and real time display TC, REAL
[F10] EXIT Return to display of maintenance information
ALT/[F8] CANCEL EDIT Display the CANCEL EDIT screen
ALT/[F9] REAL TIME Display the REAL TIME screen
Error Log Menu
The time and time codes of errors and warnings
occurring during operation can be displayed in a list
form in the display. (Maximum listing is 99 items.)
To open the error log menu
Press the SFT button (see page 2-6) and the DIAG
button (see page 2-5), then press the [F2] (ERR LOG)
button.
For more information about error log menu settings, refer
to the Maintenance Manual Volume 1.
Clearing warning messages
1 Press the ALT/[F8] (CANCEL EDIT) buttons.
2 Select the message to be cleared using the R and r
buttons.
3 Press the [F2] (MARK) button.
An asterisk “*” will appear in front of the
message.
The message will not be displayed or saved.
95.00:00:00:00 (W) 1B
NO A5/A6 INPUT
96.00:00:00:00 (W) 1C
NO A7/A8 INPUT
97.00:00:00:00 (W) 1D
NO A9/A10 INPUT
95.00:00:00:00 (W) 1E
NO A11/A12 INPUT
TOTAL 99
PAGE
END
PAGE
TOP
ALL
CLEAR
TC
WARNI-
NG
on
ERROR
on
TIME
FULL
MSG
CONDI-
TION
on
EXIT
ERROR LOG '03/06/02 10:27:28
To cancel clearing
Select the warning message you want to cancel
clearing, and press the [F2] (MARK) button.
Adjusting the clock
Press the ALT/[F9] (REAL TIME) buttons in the error
log menu and use the setting below.
To get current time codes
Hold down the SFT button and press the [F5] (GET
TC) button.