Filter
Top Products
Chapter 5 Recording/Playback 5-5
Chapter 5 Recording/Playback
5-2 Recording
To record, follow the procedure below.
1 Check that the REC INHIBIT indicator is off, then
insert a cassette.
For details on inserting a cassette, see “3-3-2 Inserting
and Ejecting Cassettes” on page 3-7.
2 Press the PLAY button while holding down the
REC/EDIT button.
Recording starts and the SERVO indicator lights
up to indicate that the servo is locked.
3 Press the STOP button to stop recording.
If the recording continues to the end of the
tape
If the VTR SETUP menu item 407 “AUTO REWIND”
is set to “on”, then the tape automatically rewinds to
the beginning and stops.
1
3
2