Filter
Top Products
Menu List
A-14 Appendix
Appendix
Items Relating to VTR Operations (001~)
Item number Item Setting Function
001 PRE-READ [off]
on
Selects the pre-read (read-before-write) mode for insert
editing.
off: No pre-read operation
on: Pre-read operation
002 REC INHIBIT
select
[off]
all/crash REC/video
CTL/audio CTL
casst
Selects the record inhibit mode.
off: Recording is enabled. (The REC INHIBIT indicator does
not light.)
all/crash REC/video CTL/audio CTL: Recording is inhibited
on the set channels.
The scope of inhibiting recording is determined by menu
item 003.
casst: When the recording protection plug on the cassette is
pushed in, this setting is displayed. This setting cannot
be selected.
003 REC INHIBIT
AREA select
[all]
crash REC
video/CTL
audio/CTL
casst
Selects the scope to which inhibiting recording applies.
all: All recording is inhibited. (The REC INHIBIT indicator
lights.)
crash REC: The normal recording mode is inhibited. Use this
setting when you wish to record in assemble editing or
insert editing only.
video/CTL: Recording of video and CTL is inhibited.
audio/CTL: Recording of audio and CTL is inhibited.
casst: When the recording protection plug on the cassette is
pushed in, this setting is displayed. This setting cannot
be selected.
The REC INHIBIT indicator lights or flashes to indicate the
state of the recording inhibit mechanism on the cassette.
For details, see item 104.
005 SERVO/AV
REFERENCE
select
[input]
auto
external
The servo reference is determined by the following menu.
input: The reference signal is obtained from the HD SDI
INPUT A/B connectors.
auto: During recording and in the edit preset state, the
reference signal is obtained from the HD SDI INPUT A/B
connectors .
When item 001 is not set to off, the reference signal is
always external.
In all other cases, the servo operates using the signal
selected in item 006 as the reference signal. If the signal
selected in item 006 is not present, the servo operates
using an internal reference signal.
external: The servo reference signal is always external.
006 EXTERNAL
REFERENCE
select
When item 005 is set to external, this selects the signal used
as reference by this unit.
extrn HD: The signal input to the REF. INPUT 1 connector is
used as the tri-level HD reference signal for playback
and audio signal recording.
extrn SD: The signal input to the REF. INPUT 1 connector is
used as the SD reference signal for playback and audio
signal recording.
[extrn HD]
extrn SD
(Continued)