Filter
Top Products
Menu List
A-26 Appendix
Appendix
Items Relating to Prerolling (401~)
401
Item number
Item
FUNCTION MODE
AFTER CUE-UP
[stop]
still
Selects the operation mode that the VTR changes to after
completing a cue up operation.
stop: Enters stop mode.
still: Enters still-picture mode (search mode).
Note
When setting the standard constant on the editor and
control the unit, set to “stop.”
Setting
403 capstan only
[reel/capstan]
CUEUP BY TC
This setting is only active when item 602 is set to TC or
UBIT.
capstan only: The tape runs with the pinch ON during cue
up. (The maximum tape speed is ten times normal tape
speed.)
reel/capstan: The tape runs with the pinch OFF state during
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.
This setting is only active when item 602 is set to CTL.
capstan only: The tape runs with the pinch ON state during
cue up. (The maximum tape speed is ten times normal
tape speed.)
reel/capstan: The tape runs with the pinch OFF state during
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.
When this unit is controlled by an editor (BVE-2000/BVE-
9100, etc), and the setting is “reel/capstan”, cue up
operations are done at high speed.
Select “capstan only” when editing precision has priority.
CUEUP BY CTL404 [capstan only]
reel/capstan
405
CUE MENU
DEFAULT MODE
select
[page mode]
extend mode
Selects the default mode when the CUE menu is opened.
page mode: PAGE mode
extend mode: EXTEND mode
406
CUE MENU
PREROLL OFFSET
[0 sec]
.
.
.
30 sec
Sets the preroll time for a cueing up operation from the CUE
menu.
Function
321 VIDEO PREVIEW
MODE
[VVV]
VBV
During a preview operation, this selects the video signals
that can be monitored on the monitor output and line output
connectors.
VVV: VIDEO-VIDEO-VIDEO: In the editing interval the
monitored signal is the player video signal or video input
(EE) signal.
VBV: VIDEO-BLACK-VIDEO: In the editing interval the
monitored signal is a black signal.
322
AUDIO PREVIEW
MODE
[SSS]
SMS
During a preview operation, this selects the audio signals
that can be monitored on the monitor output and line output
connectors.
SSS: SOUND-SOUND-SOUND: In the editing interval the
monitored signal is the player audio signal or audio input
(EE) signal.
SMS: SOUND-MUTE-SOUND: In the editing interval the
audio signal is muted.
Item number Item Setting
Function
(Continued)