Filter
Top Products
Chapter 4 Menu Settings 4-3
Chapter 4 Menu Settings
To unregister the selected item
Press the [F6] (BLANK) button.
When a function button with other than the default
assignment is selected, the [F4] (KEY DEF.)
button is valid.
To return the selected function button to its default
setting, press the [F4] (KEY DEF.) button.
5 Press the cursor t button to move the cursor (B)
to the PF ASSIGN menu, then press the cursor R or
r button to move the cursor to the menu item to be
registered.
To scroll the menu faster
Press the cursor R or r button while holding down
the SFT button.
6 Press the [F7] (PASTE) button to register the item.
The new item is registered to the function button.
7 Repeat Steps 3 to 6 to register more items.
To cancel the registration of all new items
Press the [F9] (CANCEL) button.
8 Press the [F10] (SAVE/EXIT) button to save the
newly registered items.
The registration is completed and the SET UP
menu appears in the display again.
4-1-4 VTR Memory Bank
Function
Eight VTR memory banks are provided for storing up
to eight sets of menu settings.
The contents of all eight VTR memory banks can be
stored on a memory stick.
For details on memory stick use, see “4-1-5 Memory Stick
Function” on page 4-5.
For details on adding titles to the contents of the VTR
memory bank, see “4-1-6 Adding Titles to the Data” on
page 4-11.
Note
The contents of SETUP BANKF cannot be changed.
Storing the current VTR menu settings to
a VTR memory bank
1 Press the SET UP button.
The SET UP menu appears in the display.
Item to be
registered
PAGE
PAGE
DEF.
KEY
DEF.
PASTE CANCEL SAVE/
EXIT
BLANK
ALT+HOME
F1 : 001
F2 :
F3 : K17
F4 :
F5 :
F6 : 302
F7 : K18
F8 : K25
F9 : K44
F7
DMC
VTR SETUP MENU -
632:JUMP TC sel
705:YAOO
706:MASTER(HD)
708:Y LEVEL(HD)
710:PB LVL(HD)
711:PR LVL(HD)
712:SETUP(HD)
713:SYNC(HD)
714:FINE(HD)
-
Memory stick (SETUP
BANK 0 to 8). The stick
stores setting data in same
way as the VTR memory
banks. These contents can
be later called up in the
VTR.
Current menu settings in the
VTR (CURRENT SETUP).
These settings are stored
outside the VTR memory
banks even when the power
is off.
VTR memory banks (SETUP
BANK1 to 8 and F). SETUP
BANK F contains the factory-
set menu settings. By calling
up SETUP BANK F, you can
restore all menu items to their
factory settings.
Storing/recalling
Storing/recalling
Storing/recalling
4 6
1
32
5
CLR button
(Continued)