Filter
Top Products
Appendix A-39
Appendix
Item SettingItem number
Function
813 AUDIO MONITOR
OUTPUT MIXING
Specifies the type of audio mixing to be conducted on the
digital audio signal output to the MONITOR OUTPUT L/R
connector.
add: Simple addition
rms: Multiplied average
average: Simple average
Note
When the CUE channel signal is output to the monitor,
signals are mixed by simple addition.
add
[rms]
average
Specifies the mode in which the digital audio level is
displayed.
peak 0 dB: Displays minus audio levels with the maximum
level set at 0 dB.
reference 0 dB: Displays plus and minus audio levels with
the reference level set at 0 dB.
Note
The cue channel level is always displayed with the reference
level set at 0 dB.
LEVEL METER
SCALE
814 [peak 0 dB]
reference 0 dB
Sets the output timing for the digital audio playback signal
(SDI and AES/EBU only). The 128 setting specifies the
reference position.
A setting lower than 128 advances the output timing, and a
setting higher than 128 delays the output timing.
(128 samples, or approx. 2.7 ms, with 1 sample = approx.
20 µs)
815 AUDIO OUTPUT
PHASE
preset: 128
0
.
.
.
[128]
.
.
.
255
830
AUDIO INPUT
SELECT
AES/EBU
[SDI]
Selects the input signals for audio channels 1 to 12. This is
only valid when 831 NON AUDIO SELECT is set to “off”.
AES/EBU: Selects signal input to DIGITAL I/O (AES/EBU)
INPUT connector.
SDI: Selects signal input to HD SDI INPUT A connector.
A-IN ALL (sub item): Sets the items A-IN CH1 to CH12 to
the same value.
(Continued)
Sub items
A-IN ALL
A-IN CH1
A-IN CH2
A-IN CH3
A-IN CH4
A-IN CH5
A-IN CH6
A-IN CH7
A-IN CH8
A-IN CH9
A-IN CH10
A-IN CH11
A-IN CH12