Filter
Top Products
Appendix A-31
Appendix
Item number SettingItem Function
618 LTC OUTPUT
PHASE select
input
auto
[output]
Selects the LTC output phase.
input: Same phase as input video.
auto: When editing, same phase as input video; otherwise
(playback, recording, etc.), same phase as output video.
output: Same phase as output video.
622 CHARACTER H-
POSITION
0
.
.
.
[8]
.
.
.
15
Sets the horizontal position of text information
superimposed on the signal output from the MONITOR
connector of SD SDI OUT, the SD OUT COMPOSITE
connector and FORMAT CONV. OUT (OPTION) connector.
A setting of 0 displays the information at the left edge of the
screen, and the position moves to the right as the setting is
increased. There are 16 possible settings, from 0 to 15.
620 SUPERIMPOSED
CHARACTER
[off]
on
Specifies whether or not to superimpose time data and
operating status information on the signal output from the
MONITOR connector of SD SDI OUT, the SD OUT
COMPOSITE connector and FORMAT CONV. OUT
(OPTION) connector.
off: No information is superimposed.
on: Information is superimposed.
619 EXT LTC MODE direct
[regene]
Selects the recording mode when the internal time code
generator is set to regenerate the input from the TIME
CODE IN connector (menu item 607 is set to “ext-LTC”, and
menu item 606 is set to “regene”).
direct: Records the time code input from the TIME CODE IN
connector unaltered on the tape.
regene: Regenerates the time code input from the TIME
CODE IN connector with the internal time code
generator.
623 CHARACTER V-
POSITION
0
.
.
.
[22]
.
.
.
23
Sets the vertical position of text information superimposed
on the signal output from the MONITOR connector of SD
SDI OUT, the SD OUT COMPOSITE connector and
FORMAT CONV. OUT (OPTION) connector. A setting of 0
displays the information at the bottom of the screen, and the
position moves up as the setting is increased. There are 24
possible settings, from 0 to 23.
Note
If two-line display is selected in item 626, sometimes the
second line will disappear in the middle of the screen.
624 CHARACTER
TYPE
without BG
outlined
translucent
[withBG]
Sets the style of text information such as time codes output
from the MONITOR connector of SD SDI OUT, the SD OUT
COMPOSITE connector and FORMAT CONV. OUT
(OPTION) connector.
without BG: White characters, with no background.
outlined: White characters outlined in black.
translucent: White characters on a gray screen background.
with BG: White characters on a black background.
Note
For the SD SDI OUT connector and SD OUT COMPOSITE
(SUPER) connector, the “translucent” setting is
automatically changed to “with BG”.
625
CHARACTER SIZE
× 1
[x 2]
Sets the size of text information such as time codes output
from the MONITOR of SD SDI OUT, the SD OUT
COMPOSITE connector and FORMAT CONV. OUT
(OPTION) connectors.
× 1: Normal size.
× 2: Twice normal size.
(Continued)