Filter
Top Products
2-1 Control Panel
2-10 Chapter 2 Locations and Functions of Parts
Chapter 2 Locations and Functions of Parts
5 Search Control Section
1 SHUTTLE button
Press to enter shuttle mode. In this mode, the button
lights and playback at the speed corresponding to the
angle of rotation of the search dial is possible. The
playback speed range depends on the frame frequency
of the unit. In this mode, the search dial clicks at the
positions for 0 (still picture) and ±10 times normal
playback speed (HDCAM/Digital Betacam) or ±8
times normal playback speed (HDCAM-SR).
2 JOG button
Press to select jog mode. In this mode, the button
lights up and playback is possible at –1 to +1 times
normal speed, ± 2 times normal speed (HDCAM/
HDCAM-SR), or ±3 times normal speed (Digital
Betacam) (determined by the setting in the VTR
SETUP menu item 107 “JOG DIAL RESPONSE”). In
this mode, the search dial does not click.
R
E
V
E
R
S
E
F
O
R
W
A
R
D
S
H
U
T
T
L
E
J
O
G
V
A
R
3 VAR (variable) button
Press to select variable speed playback mode for
noiseless playback in the range from –1 to +2 times
normal speed (HDCAM/HDCAM-SR) or –1 to +3
times normal speed (Digital Betacam). Playback
exceeding this speed range is not possible. The search
dial clicks at the positions for still-picture and normal
playback speed.
4 Search dial
Rotate to search for edit points. Rotate the dial
clockwise for forward playback (the B indicator lights
up) or counterclockwise for reverse playback (the b
indicator lights up). The x indicator lights up while
the VTR is in stop mode.
Shuttle mode: The playback speed corresponds to
the angle of rotation of the search dial. The
playback speed range depends on the frame
frequency of the unit. (See item 1SHUTTLE
button.) The dial clicks at the positions for 0 (still
picture) and ±10 times normal playback speed
(HDCAM/Digital Betacam) or ±8 times normal
playback speed (HDCAM-SR).
Jog mode: The playback speed corresponds to the
rotational speed of the dial (–1 to +1 times normal
speed, ± 2 times normal speed (HDCAM/
HDCAM-SR), or ±3 times normal speed (Digital
Betacam)) depending on the setting of the VTR
SETUP menu item 107 “JOG DIAL
RESPONSE”). The dial does not click.
Variable speed playback mode: Noiseless playback
is possible in the range from –1 to +2 times
normal speed (HDCAM/HDCAM-SR) or –1 to +3
times normal speed (Digital Betacam). The speed
settings can be changed using the menu. The dial
clicks at the positions for still-picture and normal
playback speed.
Capstan override mode: Rotating the dial while
holding down the PLAY button changes the
playback speed by up to ±15%.
1 SHUTTLE button
2 JOG button
3 VAR button
4 Search dial
Frame frequency Playback speed
23.98/24 Hz Ranging from ±50
25 Hz Ranging from ±48
29.97/30 Hz Ranging from ±40