Chapter 3 Setting Up the VTR 3-7
Chapter 3 Setting Up the VTR
3-3-1 Recommended Cassettes
For recording and playback:
Use
1
/2 inch HDCAM-SR cassettes.
The maximum recording time is as shown in the
following table.
For playback only:
Use
1
/2 inch HDCAM or Digital Betacam cassettes.
The maximum playback time is as shown in the
following table.
Note
Playing back a digital Betacam cassette requires the
Digital Betacam Option (HKSR-5002).
Storage of cassettes
Store your cassettes at room temperature and normal
humidity.
1
2
3-3 Handling Cassettes
L-size cassette
S-size cassette
System
frequency
29.97/30 Hz 25 Hz 23.98/24 Hz
HDCAM
SR-cassette
System
frequency
29.97/30 Hz 25 Hz 23.98/24 Hz
S-size cassette 40 minutes 48 minutes 50 minutes
L-size cassette 124 minutes 149 minutes 155 minutes
HDCAM
cassette
System
frequency
29.97 Hz 25 Hz
S-size cassette 40 minutes 40 minutes
L-size cassette 124 minutes 124 minutes
Digital
Betacam cassette
3-3-2 Inserting and Ejecting
Cassettes
Always turn on the VTR before inserting or ejecting
cassettes.
Inserting a cassette
1 Turn the POWER switch to ON.
2 Before inserting a cassette, check the following
points:
• There is no slack in the tape.
•An error message does not appear in the menu
display.
• The window of the cassette is facing up.
If there is any slack in the tape, see “Removing slack in
the tape” on next page.
When inserting an S-size cassette, make sure it is
aligned with the marks on the cassette insertion
slot.
The cassette is loaded automatically, and the tape
is wound around the drum.
S-size cassette 40 minutes 48 minutes 50 minutes
L-size cassette 124 minutes 149 minutes 155 minutes