Sony SRW-5000 VCR User Manual


 
Chapter 2 Locations and Functions of Parts 2-15
Chapter 2 Locations and Functions of Parts
2 DIGITAL I/O (input/output) section
HD SDI INPUT FC OUT BINPUT
HD SDI OUTPUT
FORMAT CONV. OUT (OPTION)
SD SDI OUT
A
DIGITAL I/O (AES/EBU)
CH1/2 CH3/4 CH1/2 CH3/4
CH5/6 CH7/8 CH5/6 CH7/8
CH9/10 CH11/12 CH9/10 CH11/12
B(OPTION)
1
2
B INPUT
MONITOR
A
1
12
12MONITOR
MONITOR
AUDIO
OUTPUT
AUDIO
2 MONITOR
B(OPTION)
A
B(OPTION)
A
B(OPTION)
INPUT
MONITOR
DIGITAL I/O
2 FC OUT B connectors
4 FORMAT CONV. OUT (OPTION) connectors
5 SD SDI OUT connectors
1 HD SDI INPUT A/B connectors
6 DIGITAL I/O (AES/EBU) OUTPUT connectors
7 DIGITAL I/O (AES/EBU) INPUT connectors
1 HD SDI (SDI video/audio) INPUT A/B
connectors (BNC)
These accept SDI video/audio signals.
Note
The INPUT MONITOR connectors are for use with an
input monitor and does not follow the standards for
output.
2 FC OUT B (FORMAT CONV. OUTPUT B
(OPTION)) connectors (BNC)
These output two sets of format-converted video/audio
signals.
Note
These are only effective when the optional HKSR-
5001 format converter board is installed. When the
output format is selected as 4:4:4, LINK B is output,
and when the output format is selected as 4:2:2 it is not
output.
3 HD SDI (SDI video/audio) OUTPUT connectors
(BNC)
These output up to three sets of SDI video/audio
signals.
When the ALT/[F6] (CHARA SUPER) buttons are set
to ON in the TC menu, time data or other text data is
superimposed on the output signal.
4 FORMAT CONV. OUT (OPTION) connectors
(BNC)
These output two sets of format-converted video/audio
signals.
When the ALT/[F5] (PD CHARA) buttons are set to
ON in the TC menu, the output has time data or other
text superimposed on the signal.
Note
This is only valid when the optional HKSR-5001
format converter board is installed. When the output
format is selected as 4:4:4, LINK A is output.
5 SD SDI (1/2/monitor) OUT connectors (BNC)
These output up to three sets of video/audio signals.
When the ALT/[F6] (CHARA SUPER) buttons are set
to ON in the TC menu, time data or other text data is
superimposed on the output from the MONITOR
OUTPUT L/R connector.
3 HD SDI OUTPUT connectors