Filter
Top Products
Chapter 5 Recording/Playback 5-9
Chapter 5 Recording/Playback
The tape is played back at a speed that corresponds
to the angle of the search dial. A direction
indicator (b or B) lights up to indicate the
direction of playback.
The search dial clicks at the positions for still-
picture and ±10 times normal-speed playback.
3 Set the search dial to center position for still-
picture, or press the STOP button to stop shuttle
mode playback.
To return to normal-speed playback
Press the PLAY button.
Note
The audio signal output status is specified by the
following settings of the VTR SETUP menu item 017
“PB/EE SELECT MENU”.
EE: The input audio is output.
MU: The audio output is muted.
PB: The playback signal is always output.
Variable mode playback
Follow the procedure below to play back in variable
mode.
1 Press the VAR button so that it lights up.
The VTR enters VAR mode.
2 Rotate the search dial in the desired playback
direction and to the desired angle.
The tape is played back slowly, at a speed
corresponding to the rotational speed of the search
dial. A direction indicator (b or B) lights up to
indicate the direction of playback.
3 Stop rotating the search dial to stop jog mode
playback.
The indicator lights up.
For details on switching the search dial functions, refer to
the Maintenance Manual Volume 1.
Shuttle mode playback
Follow the procedure below to play back in shuttle
mode.
1 Press the SHUTTLE button so that the SHUTTLE
button lights up.
The VTR enters still-picture mode.
2 Rotate the search dial in the desired playback
direction and set the angle of rotation as required
to obtain the desired playback speed.
1,2,33
1
(REV)
(F.FWD)
Shuttle mode
(Continued)
2,33
1