Filter
Top Products
4-7 SET UP Menu
4-66 Chapter 4 Menu Settings
Chapter 4 Menu Settings
VTR BANK
4-7 SET UP Menu
To activate the SET UP menu
Press the SET UP button.
To change the SET UP menu page
Press the ALT button.
“V” indicates that more than one menu page exists.
In the SET UP menu, you can store and recall menu
settings to and from the VTR memory banks and
memory stick, register items to the PF menu, and set
items in the VTR SETUP menu and PANEL SETUP
menu.
For details on storing and recalling data to or from the VTR
memory banks or memory stick, and registering items to the
PF menus, see “4-1 Registering and Storing Menu Settings”
on page 4-1.
Button
[F1]
Indication
Settings
See “4-1-4 VTR Memory Bank Function” on page 4-3.
[F2]
MEMORY CARD
See “4-1-5 Memory Stick Function” on page 4-5.
ALT/[F8]
ALT/[F9]
REMOTE 9-PIN
REMOTE 50-PIN
on, off
on, off
[F4]
PF ASSIGN
[F6]
VTR SETUP
PANEL SETUP
[F5]
Selects remote operation using a device connected to the REMOTE 2
PARALLEL I/O(50P) connector.
Selects remote operation through a device connected to the REMOTE1-
IN(9P) or REMOTE 1-I/O(9P) connector
See “4-1-3 Registering Items to the VTR SETUP Menu” on page 4-2.
See “4-7-1 VTR SETUP Menu” on page 4-68.
See “4-7-2 PANEL SETUP Menu” on page 4-71.
Function
VTR
BANK
MEMORY
CARD
PF
ASSIGN
PANEL
SETUP
VTR
SETUP
[F1]VTR BANK: Copy data between
current setup and 8 banks.
[F2]MEMORY CARD: Copy data
between VTR and memory card.
[F4]PF1&2 ASSIGN: Assign PF1/PF2
menu function keys.
[F5]PANEL SETUP; Panel setting
[F6]VTR SETUP; VTR current setup
ALT/[F7] REMOTE NET Selection of access from the ETHERNET connector
on, off