Filter
Top Products
Appendix A-5
Appendix
Error message
Error Messages and Warning Messages
Error Messages
00
H
02
M
39
S
18
F
AIN --:--:--:-- AOUT --:--:00:00
IN --:--:--:-- OUT --:--:00:00
PB/EE
LTC
TCR
INTRP DF 2FO F2
PLAY LOCK
RECINH
off
ASSEM-
BLE
off
INS
TC
off
INS
VIDEO
off
INS
A-CH2
off
INS
A-CH3
off
INS
A-CH4
off
INS
CUE
off
INS
A-CH1
off
AIN --:--:--:-- AOUT --:--:00:00
IN --:--:--:-- OUT --:--:00:00
ERROR - 88
SYS1 - SYS2
INTERFACE ERROR
Total 1 message
When the unit ceases to operate correctly due to
malfunction or an internal system error, the alarm will
sound and an error message will be displayed on the
display.
Only one message will be displayed even when
multiple errors occur, but the error log menu keeps a
history of the errors.
For more information about error messages, refer to the
Maintenance Manual Volume 1.
After the error occurs, eliminate the cause of the error
and turn the unit back on. If the error message appears
again when the unit is turned on, contact your Sony
representative.
For more information about eliminating errors, refer to the
Maintenance Manual Volume 1.
Protection Mode
To protect the tape and the mechanical parts of the
VTR, the servo control system automatically stops
tape transport and the drum motor and enters
protection mode when an error occurs.
Cassettes may not be inserted or ejected during
protection mode.
Note
When a cassette is stuck in the unit because of
protection mode, make sure to disconnect the power
before removing the cassette manually.
For information about removing cassettes manually, refer to
the Maintenance Manual Volume 1.
Item number Display Meaning
01 REEL SLACK THREAD ERROR Tape slack was detected during threading or unthreading.
02 REEL SLACK SHTL ERROR Tape slack or a broken tape was detected during search, fast
forward, or rewind.
03 REEL SLACK VAR ERROR Tape slack, a broken tape, or an S-side reel or T-side reel lock was
detected during recording or playback.
04 REEL SPEED ERROR Tape transport speed error was detected during forward winding or
rewinding.
05 REEL FG ERROR When a cassette was inserted, a fault in the S-side reel or T-side reel
operation was detected.
06 OVER TENSION During recording or playback, excess tension was detected.
07 CAPSTAN ERROR A capstan motor operation fault was detected.
08 DRUM ERROR A drum motor operation fault was detected.
09 THREAD TIME OVER A fault was detected in a threading or unthreading operation.
0A FULL TOP ERROR When threading, a failure of the tape beginning processing to
terminate was detected.
10 HUMID DETECT Condensation was detected.
11 TOP END BOTH DETECT The tape beginning and tape end were detected at the same time.
12 TAPE TOP ERROR A tape beginning sensor fault was detected.
(Continued)(Continued)