Filter
Top Products
6
PROGRAMMING
6.1 Programming Procedure
6 - 2
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PROCEDURES AND
SETTINGS BEFORE
SYSTEM OPERATION
5
UTILITY PACKAGE
(GX CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
6.1 Programming Procedure
Create a program that executes temperature input of the Q68RD3-G in the following
procedure.
Conversion enable/disable setting
Start
End
Output warnings?
NO
Output scaling values?
NO
Use the utility package?
NO
How to detect disconnection?
Processing of Operating condition
setting request (Y9)
Measured temperature value read
YES
YES
Measured temperature value
Averaging processing selection
Sampling processing
Time average
Count average
Moving average
Primary delay filter
Initial setting,
Auto refresh setting
Warning output enable/disable
Process alarm upper/lower limit value
Rate alarm warning detection period
Rate alarm upper/lower limit value
<Set these items as necessary.>
Conversion setting for disconnection
detection
Up scale
Down scale
Given value
(Set the Conversion setting value for
disconnection detection as well.)
<Select one of the setting items.>
Scaling range and width setting
Disconnection detection signal
Disconnection detection flag
YES
Initial setting
(Refer to Section 6.2.2,
Section 6.3.2.)
(Refer to
Section 6.2.3,
Section 6.3.3.)