Filter
Top Products
APPENDICES
Appendix 1 Dedicated Instructions
Appendix 1.3 G(P).OGLOAD
APPX - 5
APPENDICESINDEX
* 1 Setting is not necessary. If setting is made, the offset/gain values will not be read properly.
Table APPX.7 Control data (1/2)
*1
Device Item Setting data
Setting
range
Setting side
(S) System area
(S) + 1 Completion status
The instruction completion status
is stored.
0 : Normal completion
Other than 0: Error completion
System
(S) + 2
System area
(S) + 3
(S) + 4 CH1 Factory default offset value System
(S) + 5 CH1 Factory default gain value System
(S) + 6 CH1 User range settings offset value System
(S) + 7 CH1 User range settings gain value System
(S) + 8 CH1 User range settings resistance offset value (L)
System
(S) + 9 CH1 User range settings resistance offset value (H)
(S) + 10 CH1 User range settings resistance gain value (L)
System
(S) + 11 CH1 User range settings resistance gain value (H)
(S) + 12 CH2 Factory default offset value System
(S) + 13 CH2 Factory default gain value System
(S) + 14 CH2 User range settings offset value System
(S) + 15 CH2 User range settings gain value System
(S) + 16 CH2 User range settings resistance offset value (L)
System
(S) + 17 CH2 User range settings resistance offset value (H)
(S) + 18 CH2 User range settings resistance gain value (L)
System
(S) + 19 CH2 User range settings resistance gain value (H)
(S) + 20 CH3 Factory default offset value System
(S) + 21 CH3 Factory default gain value System
(S) + 22 CH3 User range settings offset value System
(S) + 23 CH3 User range settings gain value System
(S) + 24 CH3 User range settings resistance offset value (L)
System
(S) + 25 CH3 User range settings resistance offset value (H)
(S) + 26 CH3 User range settings resistance gain value (L)
System
(S) + 27 CH3 User range settings resistance gain value (H)
(S) + 28 CH4 Factory default offset value System
(S) + 29 CH4 Factory default gain value System
(S) + 30 CH4 User range settings offset value System
(S) + 31 CH4 User range settings gain value System
(S) + 32 CH4 User range settings resistance offset value (L)
System
(S) + 33 CH4 User range settings resistance offset value (H)