Filter
Top Products
5 - 4
5.2 Installing and Uninstalling Utility Package
5.2.1 Precautions for use
5
UTILITY PACKAGE (GX Configurator-TI)
(5) Switching screens between two or more intelligent function module
utilities
When two or more intelligent function module utility screens cannot be displayed side
by side, select a screen to be displayed on the top of others using the task bar.
(6) Number of parameters that can be set in GX Configurator-TI
When multiple intelligent function modules are mounted, the number of parameter
settings must not exceed the following limit.
For example, if multiple intelligent function modules are mounted to the MELSECNET/
H remote I/O station, make the settings in GX Configurator-TI so that the total number
of parameter settings set for all the intelligent function modules does not exceed the
maximum number of parameter settings of the MELSECNET/H remote I/O station.
Calculate the total number of parameter settings for initial setting and auto refresh
setting, respectively.
The following table shows the number of parameter settings that can be set for one
module in GX Configurator-TI.
Example) Counting the number of parameter settings for the auto refresh setting
Table 5.2 Maximum number of parameter settings
When intelligent function modules
are installed to:
Maximum number of parameter settings
Initial setting Auto refresh setting
Q00J/Q00/Q01CPU 512 256
Q02/Q02H/Q06H/Q12H/Q25HCPU 512 256
Q02PH/Q06PH/Q12PH/Q25PHCPU 512 256
Q12PRH/Q25PRHCPU 512 256
Q00UJ/Q00U/Q01UCPU 512 256
Q02UCPU 2048 1024
Q03UD/Q04UDH/Q06UDH/
Q10UDH/Q13UDH/Q20UDH/
Q26UDH/Q03UDE/Q04UDEH/
Q06UDEH/Q10UDEH/Q13UDEH/
Q20UDEH/Q26UDEHCPU
4096 2048
Q50UDEH/Q100UDEHCPU Not available Not available
MELSECNET/H remote I/O station 512 256
Table 5.3 Number of parameter settings that can be set for one module
Target module Initial setting Auto refresh setting
Q68RD3-G
6 (Fixed)
24 (Max.)