Filter
Top Products
6
PROGRAMMING
6.3 Using Programs on Remote I/O Network
6.3.1 Before creating a program
6 - 20
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PROCEDURES AND
SETTINGS BEFORE
SYSTEM OPERATION
5
UTILITY PACKAGE
(GX CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
6.3.1 Before creating a program
This section describes the steps to be taken before creating a program.
(1) Wiring of external devices
Mount the Q68RD3-G onto the base unit and connect RTD (Pt100) to CH1 to CH3.
For details, refer to Section 6.2.1 (1).
(2) Intelligent function module switch setting
Based on the setting conditions given in Section 6.3 (2), make the intelligent function
module switch setting.
For setting details of each switch, refer to Section 6.2.1 (2).
Write the intelligent function module parameters to the remote I/O station.
POINT
For details on the MELSECNET/H remote I/O network, refer to the Q
Corresponding MELSECNET/H Network System Reference Manual (Remote I/O
Network).