Filter
Top Products
APPX - 8
Appendix 1 Dedicated Instructions
Appendix 1.4 G(P).OGSTOR
APPENDICES
Appendix 1.4 G(P).OGSTOR
This instruction restores the User range settings offset/gain values stored in the CPU
module to the Q68RD3-G.
* 1 When executing the G(P).OGLOAD instruction, specify the device set for (S).
Do not change the data read with the G(P).OGLOAD instruction.
If it is changed, normal operation cannot be guaranteed.
Table APPX.8 List of available devices
Setting
data
Available device
Internal device
(System, user)
File
register
Link direct
device J \
Intelligent
function
module device
U\G
Index register
Z
Constant
Other
Bit Word Bit Word K, H $
(S)
(D)
Table APPX.9 List of setting data
Setting data Description Setting range Data type
Un Start I/O number of the module 0 to FEH 16-bit binary
(S)
*1
Start number of the device that stores control data
Within the range of the
specified device
Device name
(D)
Device that turns ON for one scan upon completion of
dedicated instruction processing
(D)+1 also turns ON at the time of error completion.
Within the range of the
specified device
Bit
G.OGSTOR
[Instruction
symbol]
[Execution
condition]
G.OGSTOR
GP.OGSTOR
Command
Command
G.OGSTOR Un (S)
(D)
GP.OGSTOR
Un
(S) (D)