Filter
Top Products
3 - 36
3.4 Buffer Memory
3.4.10 Offset/gain setting mode (Un\G26 and Un\G27)
3
SPECIFICATIONS
3.4.10 Offset/gain setting mode (Un\G26 and Un\G27)
(1) A channel targeted for adjusting offset/gain setting values in the offset/
gain setting mode is specified.
(2) Specify a channel for offset setting in Un\G26, and a channel for gain
setting in Un\G27.
(3) Multiple channels can be set at the same time. Though, specify different
channels for the offset and the gain settings; either one of Un\G26 or
Un\G27 must be set to 0 for a channel. If both settings are set to the
same channel, an error (error code 500) occurs.
(4) For details on offset/gain setting, refer to Section 4.6.
b7 b6 b5 b4 b3 b2 b1 b0
CH4 CH3 CH2 CH1CH8 CH7 CH6 CH5
CH4 CH3 CH2 CH1CH8 CH7 CH6 CH5
b15 b14 b13 b12 b11 b10 b9 b8
00000000
00000000
Un\G26
(Offset specification)
Un\G27
(Gain specification)
Data for b8 to b15 are fixed to "0". 1: Setting channel
0: Setting disabled