Filter
Top Products
4 - 15
4.6 Offset/Gain Setting
4
PROCEDURES AND SETTINGS BEFORE SYSTEM
OPERATION
(b) When switching the mode using the setting in the Mode switching setting
(Un\G158 and Un\G159) and Operating condition setting request (Y9)
(c) When switching the mode using the intelligent function module switch setting
Only the common program is required.
Stores "H4144" in Un\G158.
Stores "H0964" in Un\G159.
Stores "H0964" in Un\G158.
Stores "H4144" in Un\G159.
Common program
Processing in normal mode