Filter
Top Products
6
PROGRAMMING
6.3 Using Programs on Remote I/O Network
6 - 18
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PROCEDURES AND
SETTINGS BEFORE
SYSTEM OPERATION
5
UTILITY PACKAGE
(GX CONFIGURATOR-TI)
6
PROGRAMMING
7
ONLINE MODULE
CHANGE
8
TROUBLESHOOTING
6.3 Using Programs on Remote I/O Network
This section describes program examples based on the following system configuration
and conditions.
(1) System configuration
(2) Setting conditions for the intelligent function module switch setting
Table 6.6 Setting conditions for the intelligent function module switch setting
Channel
RTD
(Measurement range)
Offset/gain setting
CH1
Pt100
(-200 to 850 )
Factory default setting
CH2
CH3
CH4
to
CH8
Not used
Remote master station (Station No.0)
Network No.1
Remote I/O station (Station No.1)
Q68RD3-G(X/Y100 to X/Y10F)
QJ72LP25-25
QX10(X20 to X2F)
QJ71LP21-25(X/Y0 to X/Y1F)
QY10(Y30 to Y3F)