Mitsubishi Electronics QnUCPU Home Theater Server User Manual


 
5 - 4
(3) Memory capacities and necessity of formatting
Table5.2 provides the memory capacities and necessity of formatting of each memory.
Format a memory requiring formatting by GX Developer beforehand.
*1: When the memory contents become indefinite in initial status or due to the end of battery life, the memory is automatically formatted after
the CPU module is powered off and then on or is reset.
When files are written to each memory, the unit of stored file size depends on the target CPU
module and memory area.
( Section 5.3.4)
In memory capacity calculation, 1 step is equal to 4 bytes.
Table5.2 Memory capacities and necessity of formatting
Q00UJCPU Q00UCPU Q01UCPU Q02UCPU
Q03UDCPU,
Q03UDECPU
Q04UDHCPU,
Q04UDEHCPU
Formatting
Program memory
40K bytes
(10K steps)
40K bytes
(10K steps)
60K bytes
(15K steps)
80K bytes
(20K steps)
120K bytes
(30K steps)
160K bytes
(40K steps)
Necessary
Standard ROM 256K bytes 512K bytes 512K bytes 512K bytes 1024K bytes 1024K bytes Unnecessary
Standard RAM - 128K bytes 128K bytes 128K bytes 192K bytes 256K bytes
Necessary
*1
Memory
card
SRAM
card
-
Q2MEM-1MBS: 1M byte
Q2MEM-2MBS: 2M bytes
Q3MEM-4MBS: 4M bytes
Q3MEM-8MBS: 8M bytes
Necessary
(Use GX
Developer.)
Flash
card
-
Q2MEM-2MBF: 2M bytes
Q2MEM-4MBF: 4M bytes
Unnecessary
ATA
card
-
Q2MEM-8MBA: 8M bytes
Q2MEM-16MBA: 16M bytes
Q2MEM-32MBA: 32M bytes
Necessary
(Use GX
Developer.)
Q06UDHCPU,
Q06UDEHCPU
Q10UDHCPU,
Q10UDEHCPU
Q13UDHCPU,
Q13UDEHCPU
Q20UDHCPU,
Q20UDEHCPU
Q26UDHCPU,
Q26UDEHCPU
Formatting
Program memory
240K bytes
(60K steps)
400K bytes
(100K steps)
520K bytes
(130K steps)
800K bytes
(200K steps)
1040K bytes
(260K steps)
Necessary
Standard ROM 1024K bytes 2048K bytes 2048K bytes 4096K bytes 4096K bytes Unnecessary
Standard RAM 768K bytes 1024K bytes 1024K bytes 1280K bytes 1280K bytes
Necessary
*1
Memory
card
SRAM
card
Q2MEM-1MBS: 1M byte
Q2MEM-2MBS: 2M bytes
Q3MEM-4MBS: 4M bytes
Q3MEM-8MBS: 8M bytes
Necessary
(Use GX
Developer.)
Flash
card
Q2MEM-2MBF: 2M bytes
Q2MEM-4MBF: 4M bytes
Unnecessary
ATA
card
Q2MEM-8MBA: 8M bytes
Q2MEM-16MBA: 16M bytes
Q2MEM-32MBA: 32M bytes
Necessary
(Use GX
Developer.)