Filter
Top Products
10 - 8
(5) Function execution time in END processing
This is the time required for updating calender or clearing error in END processing.
(a) Calendar update processing time
When the clock data set request (SM210 changes from off to on) or the clock data read request
(SM213 turns on) is issued, the processing time for changing or reading the clock data is required in
END processing.
(b) Error clear processing time
Upon the rising edge (changes from off to on) of SM50 (Error reset), the processing time for clearing the contin-
uation error stored in SD50 is required.
Table10.10 Calendar update processing time
CPU module
Processing time in END processing
When the clock data set
request is issued
When the clock data read
request is issued
Q00UJCPU, Q00UCPU, Q01UCPU 0.040ms 0.019ms
Q02UCPU 0.040ms 0.019ms
Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU, Q03UDECPU, Q04UDEHCPU,
Q06UDEHCPU, Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU,
Q26UDEHCPU
0.011ms 0.004ms
Table10.11 Error clear processing time
CPU module
Processing time in END processing
When the error is cleared
(the one detected by the
annunciator)
When the error is cleared
Q00UJCPU, Q00UCPU, Q01UCPU 0.185ms 0.185ms
Q02UCPU 0.180ms 0.175ms
Q03UDCPU, Q03UDECPU 0.068ms 0.062ms
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU, Q04UDEHCPU, Q06UDEHCPU,
Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU
0.065ms 0.062ms