Filter
Top Products
CHAPTER6 FUNCTIONS
1
2
3
4
5
6
7
8
6.11 Monitor Function
6.11.4 Executional conditioned device test
6 - 53
4) Number of settings that can be registered simultaneously in one scan
Eight executional conditioned device test settings can be registered into the CPU module simultaneously in
one scan.
When nine or more executional conditioned device test settings are to be registered simultaneously by
GX Developer, they will be registered over multiple scans.
(b) Disabling executional conditioned device test settings
Select the disabling target step number on the program editing screen in GX Developer. Then, select [Online]
[Debug] [Executional conditioned device test] [Check/disable executional conditioned device test].
1) Number of settings that can be disabled simultaneously in one scan
Eight executional conditioned device test settings can be disabled simultaneously in one scan.
When nine or more executional conditioned device test settings are to be disabled simultaneously by GX
Developer, they will be disabled over multiple scans.
(c) Batch-disabling executional conditioned device test settings
Select [Online] [Debug] [Executional conditioned device test] [Batch disable executional conditioned
device test] in GX Developer.
Figure 6.43 Screen for checking/disabling executional conditioned device test settings
Table6.19 Items on the screen for checking/disabling executional conditioned device test settings
Item
Setting range
For bit device For word device
Program name Name of a program registered in the CPU module
Step No. 0 to (Step No. for the END instruction)
Device Device listed in (2) in this section
Execution timing Before executing instruction/After executing instruction
Figure 6.44 Screen for batch-disabling executional conditioned device test settings