Filter
Top Products
6 - 2
: Supported, : Partly supported, : Not supported
(To the next page)
Table6.1 Function list (Continued)
Item Description
Q00UJ
CPU
Q00UCPU,
Q01UCPU
Q02U
CPU
QnUD(H)
CPU
Built-in
Ethernet
port QCPU
Reference
Intelligent function module
switch setting
Makes settings for the intelligent
function modules and interrupt
modules. (Refer to manuals of
intelligent function modules and
interrupt modules for setting details.)
Section
6.10
Monitor function
Reads the status of programs and
devices in the CPU module by GX
Developer.
Section
6.11
Monitor condition setting
Specifies the monitoring timing of the
CPU module with device condition or
step number.
*1
*1
Section
6.11.1
Local device monitor/test
Monitors and/or tests the local
devices of the specified program by
GX Developer.
*1
Section
6.11.2
External input/output forced
on/off
Forcibly turns on/off the external
input/output of the CPU module by
GX Developer.
*1
*1
Section
6.11.3
Executional conditioned
device test
Changes a device value within the
specified step of a sequence
program.
*1
*1
Section
6.11.4
Online change
Writes programs when the CPU
module is in the RUN status.
Section
6.12
Program monitor list
Displays the scan time and execution
status of the program being
executed.
Section
6.13.1
Interrupt program monitor list
Displays the number of executions of
interrupt programs.
Section
6.13.2
Scan time measurement
Measures the execution time of the
area specified by the steps in a
program.
*1
*1
Section
6.13.3
Sampling trace function
Continuously samples the specified
device data at a preset timing.
Section
6.14
Debug function from multiple
GX Developers
Enables simultaneous debugging by
multiple GX Developers.
Section
6.15
Watchdog timer
Monitors operational delays caused
by hardware failure or program error
of the CPU module.
Section
6.16
Self-diagnostic function
Self-diagnoses the CPU module to
see whether an error exists or not.
Section
6.17
Error history
Stores the result of self-diagnostics
to the memory as error history data.
Section
6.18
System protection
Prevents the programs from being
modified from GX Developer, serial
communication module, and
Ethernet module.
Section
6.19