Filter
Top Products
Rev. 1.0, 07/01, page 75 of 372
Table 6-2 Transition Mode after SLEEP Instruction Execution and Transition Mode due
to Interrupt
DTON SSBY SMSEL LSON
Transition Mode after
SLEEP Instruction
Execution
Transition Mode due to
Interrupt
0 0 0 0 Sleep mode Active mode
1 Subactive mode
1 0 Subsleep mode Active mode
1 Subactive mode
1 X X Standby mode Active mode
1X0*0 Active mode(direct
transition)
—
X X 1 Subactive mode(direct
transition)
—
Legend: X : Don’t care.
* When a state transition is performed while SMSEL is 1, timer V, SCI3, and the A/D
converter are reset, and all registers are set to their initial values. To use these
functions after entering active mode, reset the registers.