Filter
Top Products
116 C624M-C (5/06)
Linking Cameras to Record in Response to Motion Events
To link multiple cameras to record in response to motion detection events:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Linking page is displayed.
3. Click the Event-Recording Link Settings tab.
4. In the Motion Record Link Settings section, do the following:
a. Select a camera from the Motion Source Camera drop-down box.
b. Click the button of each camera you want to begin recording when motion is detected by the source camera.
5. Click Apply.
Figure 80. Event-Relay Link Settings: Video-Loss Link Settings Section
Linking Cameras to Record in Response to Alarm Events
To link multiple cameras to record in response to a single alarm input:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Linking page is displayed.
3. Click the Event-Recording Link Settings tab.
4. In the Alarm Record Link Settings section, do the following:
a. Select an Alarm channel from the Alarm Channel drop-down box.
b. Click the button of each camera you want to begin recording when the source alarm is triggered.
5. Click Apply.
Figure 81. Event-Recording Link Settings: Alarm Record Link Settings Section
4
b
4a
4
b
4a