Filter
Top Products
136 C624M-C (5/06)
Figure 101. Frame Rate Configuration Dialog Box
Setting the Advanced Frame Rate
Both resolution and frame rate settings can be adjusted using the Advanced Frame Rate dialog box. Access the Frame Rate Configuration dialog
box to set the advance frame rate. For information on accessing the Frame Rate Configuration dialog box, refer to Accessing the Frame Rate
Configuration Dialog Box on page 135.
To set recording resolution and frame rates for each channel:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. In the Setup dialog box, click . The Schedule page is displayed.
3. In the Frame Rate Configuration dialog box, click Advanced. The advanced frame rate configuration controls are displayed.
4. Select the radio button of the recording mode you want to configure. Options are as follows:
•Normal
•Motion
•Alarm
•ATM/POS
5. Select resolution values for individual channels from the drop-down boxes. The following table describes the available resolution values.
Setting a resolution value for one recording mode sets the resolution value for all modes. For example, setting resolution to 640 x 480 in
Motion recording mode will change the resolution to 640 x 480 in Normal and Alarm recording modes as well.
Table AG. Resolution Values
Video Format NTSC PAL
CIF 320 x 240 352 x 288
2CIF 640 x 240 704 x 288
4CIF 640 x 480 704 x 576
2CIF 720 x 240 720 x 288
4CIF 720 x 480 720 x 576
ᕧ
ᕥ
ᕤ