Filter
Top Products
C624M-C (5/06) 177
ASSIGNING AUTOMATIC LOGIN PERMISSION TO A USER
The DX8000 allows one user to be able to automatically log in to the DX8000 application. The administrator must assign automatic login
permission to the user. Once automatic login permission is assigned to the user, the user will be automatically logged in to the DX8000
application. In this case, the assigned user does not have to enter the user name and password.
NOTE: Automatic login user permission makes the DX8000 more vulnerable because a higher level of user is logged in every time.
To assign automatic login permission:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The User page is displayed.
3. In the Auto Login User drop-down selection box, select a user.
4. Click Apply.
The next time the DX8000 application is started, the assigned user is logged in automatically.
SITE SETUP
This section describes how to connect to a remote site and includes the following topics:
• Adding a Remote Site on page 177
• Finding Active Remote Cameras on page 180
• Activating Remote Sites on page 181
• Editing a Remote Site on page 181
• Deleting a Remote Site on page 181
ADDING A REMOTE SITE
Up to 100 DX8000 DVR server sites can be added to the local server’s site list. Up to four remote DVR sites can be accessed from a single DX8000
(a total of five sites, including the local DVR, can be active on a single network segment). Up to 16 cameras can be viewed and managed for each
remote site (32 of which can be simultaneously assigned to view panels). Once a site has been added to the site list, it can be managed and
viewed just as the local DVR. The following steps allow a user with Power User access and higher to configure access to remote DVRs.
Once a remote site has been added, all viewing, searching and setup functions of that site can be accessed from the local DX8000. To access the
features of a remote site, users must possess a valid user account with the appropriate access rights for that site.
This section describes how to add a site with a static IP or dynamic IP address and includes the following topics:
• Adding a Site with a Static IP Address on page 177
• Adding a Site with a Dynamic IP Address on page 179
Adding a Site with a Static IP Address
To add a remote DVR site to the site when you know the IP address of the site:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. In the Setup dialog box, click .
3. Select the Manual radio button if it is not already selected.
4. Enter a site name for the remote DVR. (Site names can be up to 32 characters long and can contain spaces and special characters.
For example: Building 1 DVR.)
5. Enter the IP address of the remote site.