Filter
Top Products
76 C624M-C (5/06)
POS SEARCH
The DX8000 allows a user to search any 24-hour period of recorded POS video and data. To record ATM/POS video and data, the ATM/POS
devices and DX8000 must first be connected and configured as follows:
• Physically connect the ATM/POS devices to the DX8000.
• Set up camera-to-ATM/POS device linking.
• Configure the DX8000 ATM/POS settings for each attached ATM/POS device.
• Start an ATM/POS transmittal and verify that the DX8000 is receiving the ATM/POS video and data.
For information about setting up the DX8000 for ATM/POS applications, refer to the following sections:
• Linking Relay Outputs to ATM/POS Events on page 114
• Linking Cameras to Record in Response to ATM/POS Events on page 117
• Linking Presets and Patterns to ATM/POS Events on page 120
• Setting Up ATM/POS Device Communication Ports on page 149
• Setting UP ATM/POS Device Properties on page 150
This section describes how to use the POS search feature and includes the following topics:
• Understanding the POS Search View on page 77
• Searching and Displaying POS Data by Device Name on page 80
• Searching by POS Transaction Number on page 82
• Searching for All Transactions with Exceptions on page 83
• Searching for Transactions that Satisfy Specific Exceptions on page 84
• Searching for Transactions by Line Item on page 85
• Searching for Transactions by Action Code on page 86