Filter
Top Products
178 C624M-C (5/06)
6. If necessary, do the following:
a. Enter a new base port number (9002 is the default).
Unless there is a conflict on your network, you should not change port numbers from their default values. Make sure any changes to
port numbers are made consistently across all DX8000 servers and clients on a network. Client and server ports must be identical.
b. Enter a new upgrade port number (9003 is the default).
c. Enter a new information port number (9003 is the default).
d. Click Add. The site appears in the “Site IP list” on the right.
7. Repeat steps 4 through 6 for each additional site you want to add. Up to 50 remote sites can be added to the site list.
8. Click Apply.
Once a remote site has been set up, its name appears in the Site tree. It may take up to five minutes to initially connect to the site. Once a
connection has been established, cameras from the remote site can be dragged onto the main screen view panels.
Figure 124. Adding a Site with a Static IP Address
ᕨ
ᕣ
6
b
6
d
6a
6c
ᕤᕥ