Filter
Top Products
C624M-C (5/06) 161
3. In the DX8000 application window, do the following:
a. Assign a camera to a view pane.
b. Assign the ATM/POS device to the camera designated to record ATM/POS events.
4. Verify the following:
a. The POS record indicator is yellow and flashing.
b. The ATM/POS record symbol flashes blue during an ATM/POS event.
c. The ATM/POS events are displayed yellow in the timeline.
Figure 117. Recording ATM/POS Transaction
SETTING UP THE KBD300A KEYBOARD
The KBD300A allows you to operate certain DX8000 live view display functions and control camera PTZ operations from a keyboard rather than a
mouse.
When connected to the DX8000 server, the KBD300A supports two modes: the standard and shift mode. The shift mode is entered by pressing
the Shift button and is indicated by the lighting of the Shift button LED. For information about how to operate the KBD300A, refer to the KBD300A
universal keyboard Installation/Operation manual. For information about using the KBD300A, refer to Using the KBD300A Keyboard on page 59.
In summary, the steps required to set up the KBD300A for operation are as follows:
• Connect the KBD300A to the DX8000: For information about connecting the KBD300A to the DX8000, refer to the DX8000 Installation
manual.
• Configure the KBD300A communication settings: Refer to the instructions below.
4
b
3a
4a
3
b
4c