Filter
Top Products
56 C624M-C (5/06)
Adding Presets to a Tour
To add presets to a tour:
1. Access the Preset tour group dialog box. For information on accessing the Preset tour group dialog box, refer to Accessing a Preset Tour
Group on page 55.
2. Click the check box next to one of the presets you want to add to the tour.
3. Double-click within the Dwell Time field of the preset and increase or decrease the time in seconds the camera will remain on the preset
during that sequence of the tour.
4. Repeat steps 1 and 2 for each additional preset you want to add to the tour.
5. Click Add to Group.
6. Click Save.
7. Click Exit to return to the main screen.
Figure 32. Adding Preset to Tour
ᕢ
ᕣ
ᕥ
ᕦ
ᕧ