Pelco C624M-C (5/06) DVR User Manual


 
50 C624M-C (5/06)
ACTIVATING A PATTERN
When activated, a pattern will repeat indefinitely until it is cleared, another pattern is set, or the on-screen PTZ control is moved.
To activate a pattern:
1. On the DX8000 keypad, click a pattern number (1 to 4) on the keypad.
2. Click .
Figure 24. Activating a Pattern
CLEARING A PATTERN
To clear a pattern:
1. On the DX8000 keypad, click to enter programming mode.
2. Select a pattern number (1 to 4) on the keypad.
3. Click .
4. Click .
5. Click again.
6. Click again to exit programming mode.
Figure 25. Clearing a Pattern