Filter
Top Products
C624M-C (5/06) 163
KBD300A Shift Mode Operational Features
The following table describes the KBD300A Shift Mode operational features.
INSTALLING OR UPDATING DEVICE PROTOCOLS
The DX8000 uses dynamic-link library (DLL) files to support the various ATM, dome, and keyboard device protocols. The DX8000 is shipped with a
default set of protocols and devices for Pelco and other manufacturers. As new devices or updates are made available, the DX8000 allows you to
install new or update existing device protocols to support the new or current ATM, dome, and keyboard devices.
• DLL files for Pelco devices supported by the DX8000 are provided by Pelco.
• DLL files for other manufacturer devices supported by the DX8000 are provided by the respective vendor.
To install or update a device (PTZ, POS, or keyboard) in the DX8000:
1. Insert the CD containing the Pelco DLL files in the DX8000 CD drive.
2. In the Network page, click the Port/Device tab. The Port/Device page is displayed.
3. Click Install. The Protocol Install dialog box opens.
4. Click Browse and located the DLL files for the device.
5. Click Update.
6. Click Exit.
Table AV. KBD300A Shift Mode Operational Features
Control Action
Joystick Activity within the DX8000 Site tree:
• Up/Down direction: Moves the cursor vertically through each element in the Site tree.
An element is a DX8000 site, camera within each DX8000 site, or alam, ATM/POS, or relay within each
DX8000 site.
If an element is expanded, the joystick moves the cursor vertically through the objects of that element.
• Left/Right direction:
– Right: Expands an element to display objects contained under the element.
– Left: Collapses an element and hides its objects. Select a camera/ unit at the tree.
Number + CAM Expands the specified DX8000 Site tree. If there are two sites, 1 + CAM expands DX8000 site 1; 2 + CAM expands
DX8000 site 2.
F2, F3, ON, OFF Cameras are assigned numerically 1–16 to the respectively number video. These controls display DX8000 video in
the following divisions:
• F2/OFF: Single division view
• F3/MOM: 4-division view
• AUX ON: 9-division view
• AUX OFF: 16-division view