Filter
Top Products
C624M-C (5/06) 157
Creating an ATM/POS Exception
To create an ATM/POS exception:
1. In the Network page, click the Port/Device tab. The Port/Device page is displayed.
2. In the device drop-down box, select an ATM/POS device.
3. In the Communication Port Configuration section, click Configure. The Device Configuration page is displayed.
4. Click the Advanced tab. For information about the Advanced page, refer to Setting Up ATM/POS Exceptions on page 155.
5. In the ATM/POS Name drop-down box, select an ATM/POS device.
Figure 113. Advanced Page
6. In the Exception Table section, click Add. The Exceptions dialog box opens.
Figure 114. Exceptions Dialog Box
ᕤ
ᕥ
ᕦ
ᕨ
7
b
7e
7e
7a
7a
7c
7c
7
d