Filter
Top Products
180 C624M-C (5/06)
FINDING ACTIVE REMOTE CAMERAS
After connecting to a remote site, you should query the server to see which cameras are active. Some DVRs have eight channels, while others
have 16.
To refresh the screen and see which cameras are active:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. In the Setup dialog box, click .
3. Select the Manual radio button if it is not already selected.
4. Enter a remote site IP address.
5. Click Refresh.
6. Click Apply.
Figure 126. Finalizing Site Setup
ᕥ
ᕣ
ᕤ