Filter
Top Products
C624M-C (5/06) 95
Figure 63. Export Video Dialog Box
DISCONNECTING A NETWORK DRIVE
To disconnect a network drive:
1. On the DX8000 toolbar, click . The DX8000 is in the Search mode.
2. Click . The Export Video dialog box opens.
3. Click Disconnect NetDrv. The Disconnect Network Drive dialog box opens.
4. Select the network drive that you want to disconnect.
5. Click OK. The drive is disconnected and removed from the Export Video dialog box Device area.
PERFORMING THE EXPORT
This section describes how to export data and includes the following topics:
• Starting an Export Process on page 95
• Changing a Bookmarked Time Range on page 97
• Assigning a Custom Export Video File Name on page 97
• Selecting the Export Format on page 98
• Exporting a Sequence of Still Images on page 99
• Finalizing an Export Process on page 99
• Stopping an Export While in Process on page 100
• Working with DX8000 Backed-Up Video on page 100
STARTING AN EXPORT PROCESS
To start the export process:
1. Make sure the DVR is in Playback or Search mode by clicking or .
2. Click if you are in Live mode, or proceed to step 3 if you are in Search mode.
3. Click . The Export Video dialog box opens.
4. Click the plus (+) sign next to a drive in the Device list. Available devices are indicated by a check box to the left of the device name.