Filter
Top Products
‘Ihble
5-4. Functional Index (continued)
Function
Category
:ALIBRATION
Command
AMPCOR
AMPLEN
Corresponding
Key Function
Azip
Cur functions
Description
Applies amplitude corrections at
specified frequencies.
Returns the number of
frequency-amplitude correction factors
that have been entered.
:OMMAND
YRIGGER
CAL
CNF
CORREK
CRTHPOS
CRTVPOS
ONCYCLE
ONDELAY
ONEOS
ONMKR
ONMKRU
ONSRQ
ONSWP
ONTIME
WAIT
ICAL)
calibration functions
Initiates self-calibration routines.
CONF TEST
Performs the confidence test.
Returns a
”
1”
lf
the correction factors
are on, a “0” if they are off.
CRT
HORE
POSITIOK
Specifies the horizontal position of the
text and graticule on the spectrum
analyzer’s display.
CRT
VERT
POSITIOW
Specifies the vertical position of the text
and graticule on the spectrum analyzer’s
display.
Executes the
list
of analyzer commands
periodically.
Executes the list of analyzer commands
after the time value has elapsed.
Executes the list of analyzer commands
after the end of the sweep.
Performs the list of analyzer commands
when the sweep reaches the marker
position.
Executes the list of analyzer commands
whenever the value or the units of the
active marker are changed.
Executes the list of analyzer commands
whenever a service request occurs.
Executes the list of analyzer commands
at the beginning of the sweep.
Executes the list of analyzer commands
at the specified time.
Suspends all spectrum analyzer
operation for the specified time
duration.
!ONFIGURATION
BAUDRATE
CAT
DATEMODE
DISPOSE
FORMAT*
PLTPRT
PLTPRT
POWERON
BAUD
RATE
Catalog Card
*
,
Catalog
Internal
DATEHODE
MDY
BHY
ERASE
DLF
MEN
FOIWAT
CARD
*
PLT PORT RPIB PAR
PLT PORT
SER
PAR
PDRER
ON IP LAST
Specifies the baud rate of a spectrum
analyzer with Option 043 installed in it.
Returns the catalog information of
either spectrum analyzer memory or the
memory card.
Allows you to set the format for
displaying the real-time clock.
Frees spectrum analyzer memory that
was previously allocated for
user-defined operands.
Formats the memory card.
Directs the plotter output to HP-IB or
parallel ports for Option 041.
Directs the plotter output to RS-232 or
parallel ports for Option 043.
Selects the spectrum analyzer’s power
on state.
An HP 8590L or HP 8592L needs an Option 003 installed in it to use this command.
Programming Commands 5-13